The ASSEMBLY Show

OCTOBER 23 - 25 2018

DONALD STEPHENS CONVENTION CENTER

ROSEMONT, IL

Branson Ultrasonics Spotlights Laser Technology For Assembly Automation

emerson

Branson Ultrasonics, a business of Emerson, will be demonstrating their Contoured Laser Technology (CLT) at The Assembly Show 2014, booth number 623. Branson personnel will demonstrate laser capabilities and the benefits of laser technology to plastic welding.

CLT allows designers to incorporate visible, virtually particulate-free weld lines into the product design for superior aesthetics, maximum product integrity, and enhanced production efficiency. Because the process is non-intrusive, the parts typically have excellent cosmetic properties – there is no relative motion between the parts, any excitation or vibration, or large heated platens, only the weld area is heated and melted. The end result is a particulate free and aesthetically clean weld joint. This is of particular importance in under-the-hood automotive and medical applications.

Read more: Branson Ultrasonics Spotlights Laser Technology For Assembly Automation

Henkel Unveils First Hybrid Structural Instant Adhesive

Humidity-Resistant Loctite® 4090™ Combines Speed of Cyanoacrylate With Strength of Epoxy henkel

October 1, 2014 -- Rocky Hill, Conn. – Henkel Corporation has introduced Loctite® 4090™, a versatile, patented hybrid adhesive that combines the bond strength of a structural epoxy with the speed of an instant adhesive. This powerful combination delivers the first structural cyanoacrylate - an adhesive that offers rapid, high strength bonding to a range of substrates along with impact and moisture resistance, and temperature resistance to 300°F. Versatile enough to solve both indoor and outdoor design and assembly challenges, the new technology greatly expands the capabilities of cyanoacrylates, especially in applications where traditional instant adhesives offer too little strength or are too brittle.

Read more: Henkel Unveils First Hybrid Structural Instant Adhesive

MS-50 GT Console Helium Leak Detectors Sport Touch-Screen Display

vic

Ronkonkoma, N.Y., April 9 -- Vacuum Instrument Corp., a world leader in the leak detection industry, today introduced a console series of Helium and Argon mass spectrometer leak detectors with LCD touch-screen GUIs. The leak detectors are used for testing the integrity of semiconductors, electronics, aerospace, medical products, research and development as well as a host of other applications which require the mass spectrometer leak detection.

All models include a 10” capacitive touch-screen flat panel LCD display mounted on an articulating bracket that allows the operator to use his/her finger to navigate through a vast array of menus, settings and options. The Touch-Screen GUI allows for greater system control and monitoring during system start-up and operation.

Read more: MS-50 GT Console Helium Leak Detectors Sport Touch-Screen Display

Desoutter is celebrating our 100 year anniversary by bringing to market new cordless products for 2014 Assembly Show!

desoutter

In an effort to ease operator comfort and remove trip hazards on the job by dangling airlines or tools tethered to controllers. Desoutter is launching a new line of cordless technology. We at Desoutter are formally launching an optimal solution to this problem with a new power tool, cordless with wireless communication to a controller capable of full traceability of the tightening process. This new compact tool is the lightest on the market in its range with a slim angle head design for an easier access to “hard to reach” joints inside big parts.

Read more: Desoutter is celebrating our 100 year anniversary by bringing to market new cordless products for...

Cincinnati Test Systems Sentinel Product Technology Sentinel I28 Pressure and Flow Test Instrument

cts

Harrison, OH - The Sentinel I28 is a multi-functional leak and flow test instrument built for maximum performance utilizing high speed pressure and flow measurement technology. Designed by Cincinnati Test Systems, the instrument utilizes advanced algorithms derived from over 30 years of proven test experience to produce fast and accurate results required by the most demanding customers. The Sentinel line of instruments has earned a top notch name in the marketplace and the high caliber Sentinel I28 instrument is no exception. The I28 conducts accurate measurements in part to its multi-point factory calibration process and holds this accuracy with an on-site calibration verification process.

Read more: Cincinnati Test Systems Sentinel Product Technology Sentinel I28 Pressure and Flow Test Instrument

Innovation in 2014 includes a new spin on screw-tightening from Janome Industrial Equipment

See Demonstrations of our Tinned Wire Splicing Capabilities at The Assembly Show, Booth # 346   janome

Innovation in 2014 includes a new spin on screw-tightening from Janome Industrial Equipment. The soon-to-be-released JR3000 series will incorporate the optional use of an additional axis on the 4-axis platform; totaling 5. This additional movement attached to the R-axis (rotation) will allow users to pivot the driver to reach tightening locations off-plane; unreachable with a 3-axis configuration. No need to re-fixture parts for side-wall, front, or rear tightening! Communication options will be expanded to include CC-Link, DeviceNet, and Profibus.

Read more: Innovation in 2014 includes a new spin on screw-tightening from Janome Industrial Equipment

Tinned Wires CAN be Ultrasonically Spliced with Our Made-in-the-USA SpliceRite™ Units

See Demonstrations of our Tinned Wire Splicing Capabilities at The Assembly Show, Booth # 346  sonobond

WEST CHESTER, Pennsylvania, September 8, 2014 – Sonobond’s ultrasonic technology provides the only ultrasonic system capable of welding the tin-coated wires and terminals essential to electrical applications for high-temperature, high-humidity and other environmentally challenging conditions. Tin-coated copper wiring is preferred for marine motors and electronics, appliances, solar panel wiring, and some automotive applications. Only Sonobond’s ultrasonic units can achieve consistently reliable welds that remain highly conductive without sacrificing the protective properties of the tin coating.

Read more: Tinned Wires CAN be Ultrasonically Spliced with Our Made-in-the-USA SpliceRite™ Units

Lean Factory America Presents the Next Generation of Pallet Stop and Conveyor Components from ASUTEC

Electric and pneumatic pallet stops, precision locating devices and traffic control elements debut at The Assembly Show 2014 in Booth lean-factory#1313  

CINCINNATI, September 8, 2014 – Regardless of your conveying platform or system configuration, ASUTEC’s family of stops, dampeners, separators and positioning modules provide a ready, reliable and proven solution for material and traffic flow management.

The broad array of stop and traffic control solutions from ASUTEC provide the user the right device for his application. ASUTEC components are available in both dampened and non-dampened units, Within the dampened stop offering, ASUTEC offers both pneumatic and electrically actuated stops. Payload capacities span from 1 to 1,000 lbs across a wide range of conveying speeds and conveying media.

Read more: Lean Factory America Presents the Next Generation of Pallet Stop and Conveyor Components from...

Epson Announces New C4/C4l 6-Axis Robots

Epson C4/C4L 6-Axis Robots – More payload and faster speeds  epson

Carson, CA – August, 2014 – Epson Robots, a global leader in advanced robotic technology, introduces the new Epson C4 and C4L compact 6-Axis robots. With faster speeds and more payload capability while keeping the SlimLine design, Epson C4 and C4L robots provide superior performance for even the most demanding and complex applications.

Read more: Epson Announces New C4/C4l 6-Axis Robots

Info-graphics to Demo Ways to Maximize Investment in 3D and CAD Data at The Assembly Show, October

Info-graphics

(Knoxville, TN) 04 Sept 2014 — In today's business climate, the DO MORE WITH LESS mandate is always front of mind. From engineering, to marketing, to R&D, everyone has to get more done with less budget, less resources and in less time—which is why Info-graphics continually invests in tools and skills that help their clients get the most out investments in CAD and 3D data. A proven leader in content development and delivery methods, Info-graphics uses their clients’ 3D CAD data to produce photo-realistic images, work instructions, documents, and content long before prototype or production stages.

Read more: Info-graphics to Demo Ways to Maximize Investment in 3D and CAD Data at The Assembly Show, October

Weather Resistant and Flexible Adhesives for Thousands of Applications

permabond

SOMERSET, NJ – Permabond Engineering Adhesives has added new modified epoxies. The latest additions to our modified epoxy line are 2:1 mix ratio formulas that form durable, strong & flexible bonds to many substrates. They absorb & distribute stress caused by thermal expansion, broadening the range of material choices for engineers.

Read more: Weather Resistant and Flexible Adhesives for Thousands of Applications

PRODUCED BY

Assembly Magazine

GOLD SPONSOR

SILVER SPONSORS

BRONZE SPONSORS

View all Sponsors